Maple Leaf Super Macaron Hop Up Rubber 70 Degree for AEG
800.00 сом
Maple Leaf is an airsoft accessories and parts manufacturer from Taiwan that makes some of the finest internal upgrade parts and accessories at affordable prices. Producing products for all platforms ranging from GBB pistols to bolt action sniper rifles, Maple Leaf has you covered!
Maple Leaf Super Macaron is a special developed bucking to be used in your AEG or SRS replica. This bucking is designed to adapt the maple leaf crazy jet barrels, which are considered VSR/GBB cut barrels, to be used in AEG hop-up systems. While AEG buckings typically require “windowed” or “bridged” barrels, the Maple Leaf Super Macaron series slide onto “open cut/bridgeless” barrels just as a VSR style bucking would, but with the appropriate outer diameter to accommodate AEG Hop-up chambers. The bucking is best used in conjunction with the Omega Hop-up Tensioner , and Crazy Jet Barrel to really maximize your range and rein in that left and right shot deviation!
This bucking will fit bridged as well as bridgeless barrels, so be sure that your hop up chamber is designed for AEG buckings before ordering, as most GBB/VSR guns are designed for the thicker GBB/VSR buckings.
- Optimal inner and outer Sealing
- Accuracy and Range Improvement
- Easy to install
- Fits AEG Bridged Barrels
- Fits GBB / VSR Unbridged Barrel
Different degrees available for your setup, higher FPS rifles would like to use harder ones. However with colder weather you might want to step down 5 degree to avoid a stiff bucking. Harder buckings wear down less then the softer ones. Softer ones give more consistency in your shots but wear down quicker.
The degrees of the buckings
The degrees of the hop-up buckings mark their compatibility with guns of different muzzle energies or power levels. In general, you could say: the more powerful the gun, the higher the degree. The manufacturer recommends choosing the degree of your bucking as follows:
Degree and color / Recommended power range :
- 50 : Less than 110 m/s (1.2 J)
- 60 : 90-120 m/s (0.8-1.5 J)
- 70 : 110-140 m/s (1.2-2 J)
- 75 : 130-150 m/s (1.7-2.25 J)
- 80 : over 150 m/s (2.25 J)
The compatibility of the bucking
The Maple Leaf Macaron hop-up bucking is compatible with electric guns made with Tokyo Marui standards. Note, however, that the nub of the bucking is shaped a bit different, which means that the hop-up window of the inner barrel should be at least the size of the nub, which is around 4 mm or longer.
Related products
-
Accessories
SHS V2 CNC Cylinder head with silent pad (Gold)
800.00 сомSHS V2 Cylinder head with pad
-
Accessories
G&G 14mm CCW Muzzle adaptor for SSG-1
2,000.00 сомProduct Description:G&G SSG-1 14mm CCW Muzzle Adaptor
Metal Construction
Design for Attach 14mm Counter Clockwise Thread Silencer
Suitable For G&G SSG-1 Series Airsoft Electric Gun AEG Rifle -
Accessories
V2 GEARBOX ALLOY INTERNAL UPGRADE SET (CYLINDER HEAD, NOZZLE, PISTON HEAD) FIT ALL V2 INC WAR INTEREST
800.00 сом- SUPER AIR TIGHT!!! TOP QUALITY
V2 GEARBOX ALLOY INTERNAL UPGRADE SET (CYLINDER HEAD, NOZZLE, PISTON HEAD)
FIT ALL V2 GEARBOX INC WAR INTEREST / KUBLAI etc
- SUPER AIR TIGHT!!! TOP QUALITY
-
Accessories
Maple Leaf Macaron Hop Up Rubber 80 Degree for AEG
800.00 сомHop-up, (High Operation Power Up), is basically describes the back spin trajectory of an BB pellets, by adjusting the Hop-Up to increase their range and accuracy. As the pellet shoots through this hop up bucking, the friction creates the spin, it tends to roll and backspin.
The Maple Leaf hop up has been adjusted to the specified degree so it solely depends on what the player needs. The “concave” shape bucking, it will provide you the best hop up effect ever and is made specifically for all AEGs out there.
-
Accessories
SHS 16:1 of Steel Gear Standard V2 V3 Gear box
1,800.00 сомSHS 16:1 gearset. These are a great upgrade if you’re just looking to keep the same rate of fire as the stock which is normally 18:1 ratio, so these are slightly faster. These are the latest generation with the new stronger 10 tooth bevel gears and redesigned spur and sector gears.
Features:
– Steel CNC machined
– 6 anti-reversal latches for fast back wind arrest
– Balanced sector gear (holes in side with teeth to balance it)
– For use with V2, V3 and V6 gearboxes
Reviews
There are no reviews yet.